Show Arp Security Interface - Allied Telesis x310-26FT Command Reference Manual

DHCP S C
NOOPING OMMANDS

SHOW ARP SECURITY INTERFACE

show arp security interface
Overview Use this command to display ARP security configuration for the specified ports or
all ports.
show arp security interface [<port-list>]
Syntax
Mode User Exec and Privileged Exec
Example To display ARP security configuration for ports, use the command:
awplus#
Table 3: Example output from the show arp security interface command
C613-50103-01 REV A
Parameter Description
<port-list>
The ports to display ARP security information about. The port list can
include switch ports, and static or dynamic aggregated links.
show arp security interface
awplus#show arp security interface 

Arp Security Port Status and Configuration:

Port: Provisioned ports marked with brackets, e.g. (portx.y.z)
KEY: LG = Log
TR = Trap
LD = Link down

Port Action
-------------------------------
port1.0.1 -- -- --
port1.0.2 -- -- --
port1.0.3 LG TR LD
port1.0.4 LG -- --
port1.0.5 LG -- --
port1.0.6 LG TR --
port1.0.7 LG -- LD
...
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
1875