Show Ip Source Binding; Client Ip Address - Allied Telesis x310-26FT Command Reference Manual

DHCP S C
NOOPING OMMANDS

SHOW IP SOURCE BINDING

show ip source binding
Overview Use this command to display static entries in the DHCP snooping database. These
are the entries that have been added by using the
show ip source binding
Syntax
Mode User Exec and Privileged Exec
Example To display static entries in the DHCP snooping database information, use the
command:
awplus#
Table 21: Example output from the show ip source binding command
Table 22: Parameters in the output from the show ip source binding command
Related ip source binding
Commands
show ip dhcp snooping binding
C613-50103-01 REV A
show ip source binding
awplus# show ip source binding

IP Source Bindings:

Client MAC
IP Address Address
----------------------------------------------------------------
1.1.1.1 0000.1111.2222
Parameter
Client IP
Address
MAC Address
VLAN
Port
Expires (sec)
Type
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
VLAN Port
1 port1.0.1
Description
The IP address of the DHCP client.
The MAC address of the DHCP client.
The VLAN ID the packet is received on.
The Layer 2 port name the packet is received on.
Always infinite for static bindings, or when the leave time in
the DHCP message was 0xffffffff (infinite).
DHCP Snooping binding type: Static
ip source binding command.
Expires
(sec) Type
Infinite Static
1894