Table of Contents
Advertisement
V
C
S
(VCS
IRTUAL
HASSIS
TACKING
SHOW STACK RESILIENCYLINK
show stack resiliencylink
Overview
Use this command to display information about the current status of the
resiliency-link across the members of the stack.
show stack resiliencylink
Syntax
Mode
User Exec and Privileged Exec
Example
To display information about the current status of the resiliency-link across the
stack members, use the command:
awplus#
Output
Figure 47-7: Example output from the show stack resiliencylink command
C613-50103-01 REV A
™) C
TACK
OMMANDS
show stack resiliencylink
awplus(config)# show stack resiliencylink
Stack member 1:
-----------------------------------------------------------
Status
Interface
Interface state
Resiliency-link port(s)
Stack member 2:
-----------------------------------------------------------
Status
Interface
Interface state
Resiliency-link port(s)
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
Configured
vlan4093
UP
port1.0.11
Successful
vlan4093
UP
port2.0.11
1933
Advertisement
Table of Contents
