Debug Stack - Allied Telesis x310-26FT Command Reference Manual

V C S (VCS
IRTUAL HASSIS TACKING

DEBUG STACK

debug stack
Overview This command enables the stacking debugging facilities.
debug stack [link|topology|trace]
Syntax
no debug stack [link|topology|trace]
Default Stack trace debugging is enabled.
Mode Privileged Exec and Global Configuration
Usage The command displays debug information about the stacked devices. If no
parameter is specified, all the stack debugging information will be displayed,
including link events, topology discovery messages and all notable stacking
events. If link parameter is specified, only the link events debugging information
will be displayed.
Examples To enable debugging, enter the following command on the stack master:
awplus#
To enable link debugging, enter the following command on the stack master:
awplus#
To enable topology discovery debugging, enter the following command on the
stack master:
awplus#
To enable stack trace debugging, enter the following command on the stack
master:
awplus#
Related undebug stack
Commands
C613-50103-01 REV A
™) C
TACK OMMANDS
Parameter Description
link
Stacking neighbor discovery events on stack links.
topology
Stacking topology discovery messages.
trace
Notable stacking events.
debug stack
debug stack link
debug stack topology
debug stack trace
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
1915