Clear Ip Dhcp Snooping Binding - Allied Telesis x310-26FT Command Reference Manual

DHCP S C
NOOPING OMMANDS

CLEAR IP DHCP SNOOPING BINDING

clear ip dhcp snooping binding
Overview Use this command to remove one or more DHCP Snooping dynamic entries from
the DHCP Snooping binding database. If no options are specified, all entries are
removed from the database.
CAUTION
lose IP connectivity until they request and receive a new DHCP lease. If you clear
all entries, all clients connected to untrusted ports will lose connectivity.
clear ip dhcp snooping binding [<ipaddr>] [interface
Syntax
<port-list>] [vlan <vid-list>]
Mode Privileged Exec
Usage This command removes dynamic entries from the database. Note that dynamic
entries can also be deleted by using the no variant of the
command.
Dynamic entries can individually restored by using the
command.
To remove static entries, use the no variant of the
Example To remove a dynamic lease entry from the DHCP snooping database for a client
with the IP address 192.168.1.2, use the command:
awplus#
Related ip dhcp snooping binding
Commands
ip source binding
show ip dhcp snooping binding
C613-50103-01 REV A
: If you remove entries from the database for current clients, they will
Parameter Description
<ipaddr>
Remove the entry for this client IP address.
<port-list>
Remove all entries for these ports. The port list may contain
switch ports, and static or dynamic link aggregators (channel
groups).
<vid-list>
Remove all entries associated with these VLANs.
clear ip dhcp snooping binding 192.168.1.2
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
ip dhcp snooping binding
ip dhcp snooping binding
ip source binding command.
1852