Router Ipv6 Vrrp (Interface) - Allied Telesis x310-26FT Command Reference Manual

X310 series stackable access switches for alliedware plus version 5.4.6-1.x
Table of Contents

Advertisement

VRRP C
OMMANDS
6
(
)
ROUTER IPV
VRRP
INTERFACE

router ipv6 vrrp (interface)

Overview
Use this command to configure VRRPv3 for IPv6 and define the interface that will
participate in virtual routing to send and receive advertisement messages. This
command allows you to enter the Router Configuration mode.
Use the no variant of this command to remove the VRRPv3 for IPv6 configuration.
Disable the VRRP session before using the no variant of this command.
router ipv6 vrrp <vrid> <interface>
Syntax
no router ipv6 vrrp <vrid> <interface>
Mode
Global Configuration
Usage
Use the required <interface> placeholder to define the interface that will
participate in virtual routing. This interface is used for two purposes - to
send/receive advertisement messages and to forward on behalf of the virtual
router when in master state.
You can configure up to 255 IPv4 and 255 IPv6 VRRP instances. However,
configuring a high number of instances may adversely affect the device's
performance, depending on the device CPU, the other protocols it is running, and
whether you set the advertisement interval to less than 1 second.
See the
about VRRPv3 IPv6 configuration details.
Examples
The example below shows you how to enable a VRRPv3 session with VR ID 3 on
vlan2:
awplus#
awplus(config)#
awplus(config-router)#
awplus(config-router)#
The example below shows you how to disable a VRRPv3 session with VR ID 3 on
vlan2:
awplus(config-router)#
awplus(config-router)#
awplus(config)#
awplus(config)#
C613-50103-01 REV A
Parameter
Description
<vrid>
<1-255> The ID of the virtual router VRRPv3 IPv6 session to create.
<interface>
Specify the name of the interface that will participate in the virtual
routing. The interface must exist on the router. The interface
specified sends and receives VRRPv3 IPv6 advertisement messages.
VRRP Feature Overview and Configuration Guide
configure terminal
router ipv6 vrrp 3 vlan2
no router ipv6 vrrp 3 vlan2
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
enable
disable
exit
for more information
1969

Advertisement

Table of Contents
loading

This manual is also suitable for:

X310-26fpX310-50fpX310-50ft

Table of Contents