Openflow Native Vlan - Allied Telesis x310-26FT Command Reference Manual

O F C
PEN LOW OMMANDS

OPENFLOW NATIVE VLAN

openflow native vlan
Overview Use this command to specify a VLAN as a native VLAN for the data plane ports. You
must create a VLAN using the vlan database command before specifying the VLAN
as a native VLAN.
Use the no variant of this command to change the native VLAN for the data plane
ports back to the default VLAN 1.
openflow native vlan <1-4090>
Syntax
no openflow native vlan
Default The native VLAN for the data plane ports is VLAN 1 by default.
Mode Global Configuration
Example To specify VLAN 100 as a native VLAN for the data plane ports:
awplus#
awplus(config)#
To change the native VLAN for the data plane ports back to the VLAN 1:
awplus#
awplus(config)#
Related show openflow config
Commands
C613-50103-01 REV A
Parameter Description
<vlan_id>
VLAN ID in the range <1-4090>
configure terminal
openflow native vlan 100
configure terminal
no openflow native vlan
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
1899