Operational Status; Stack Status; Product Type - Allied Telesis x310-26FT Command Reference Manual

V C S (VCS
IRTUAL HASSIS TACKING
SHOW STACK DETAIL
Table 4: Parameters in the output from the show stack detail command (cont.)
C613-50103-01 REV A
™) C
TACK OMMANDS
Parameter
Virtual Chassis
ID
Virtual MAC
Address
Disabled Master
Monitoring
Operational
Status

Stack Status

Pending ID
Stack port
status
Priority

Product Type

Provisioned
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
Description
The Virtual Chassis ID determines the last 12 bits of the
Virtual MAC address: 0000.cd37.0xxx
The Virtual MAC address of the stack.
The current Disabled Master Monitoring status. This can be:
• Enabled
• Disabled
• Inactive
The status of the stack. This can be:
• Normal operation:
If any other status is displayed, it may warrant further
investigation.
• Stacking hardware disabled:
Use the stack enable command to activate the stacking
feature.
• Operating in failover mode:
This stack member has become separated from the rest of
the stack, or it failed to join the stack correctly.
• Standalone unit:
Stacking is enabled, but no other stack members are present.
• Not all stack ports are up:
One or more stacking ports may be down, or stacking
discovery may not have detected the neighbor successfully.
The stack's overall status. Note that a warning is issued if the
stack is not connected in a standard ring topology.
The pending stack member ID. This can be changed by the
stack renumber command. If there is no pending ID, the "-"
symbol will display.
The status of the stack port. This can be:
• Down
• Neighbor incompatible
• Discovering neighbor
• Learned neighbor
Stack member master election priority (between 1 and 255)
Note that the lowest number has the highest priority.
Stack member product type. For example, x310-26FT.
Indicates that the stack position is provisionally configured,
i.e. ready to accept a particular switch type into the stack.
1931