Table of Contents
Advertisement
L
RADIUS S
C
OCAL
ERVER
OMMANDS
(RADIUS
)
USER
SERVER
user (RADIUS server)
Overview
Use this command to register a user to the local RADIUS server.
Use the no variant of this command to delete a user from the local RADIUS server.
Syntax
user <radius-user-name> [encrypted] password <user-password>
[group <user-group>]
no user <radius-user-name>
Mode
RADIUS Server Configuration
Usage
RADIUS user names cannot contain question mark (?), space ( ), or quote (" ")
characters. RADIUS user names containing the below characters cannot use
certificate authentication:
/ \ '$ &()*;< > '|
Certificates cannot be created and exported for RADIUS user names that contain
the above characters. We advise you to avoid using these characters in RADIUS
user names if you need to use certificate authentication, because you will not be
able to create and export certificates.
You also can use the IEEE standard format hexadecimal notation
(HH-HH-HH-HH-HH-HH) to specify a supplicant MAC address to configure the
user name and user password parameters to use local RADIUS server for MAC
Authentication. See the
sample MAC configuration. See also the command user 00-db-59-ab-70-37
password 00-db-59-ab-70-37 as shown in the command examples.
C613-50103-01 REV A
Parameter
<radius-user-name> RADIUS user name. This can also be a MAC address in the
encrypted
<user-password>
group
<user-group>
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
Description
IEEE standard format of HH-HH-HH-HH-HH-HH if you are
configuring MAC authentication to use local RADIUS server.
Specifies that the password is being entered in its
encrypted form, so that it is not further encrypted.
When creating a new user, enter the password in plaintext,
and do not use the encrypted parameter.
Use the encrypted parameter only when referring to a user
that has previously been created. For instance, when
adding an existing user from another RADIUS server, use
the encrypted parameter, and enter the encrypted version
of the password that appears in the output of show
commands for the user.
User password. This can also be a MAC address in the IEEE
standard format of HH-HH-HH-HH-HH-HH if you are
configuring MAC authentication to use local RADIUS server.
Specify the group for the user.
User group name.
AAA Feature Overview and Configuration Guide
for a
1811
Advertisement
Table of Contents
