Table of Contents
Advertisement
L
RADIUS S
C
OCAL
ERVER
OMMANDS
SERVER ENABLE
server enable
Overview
This command enables the local RADIUS server. The local RADIUS server feature is
started immediately when this command is issued.
The no variant of this command disables local RADIUS server. When this command
is issued, the local RADIUS server stops operating.
Syntax
server enable
no server enable
Default
The local RADIUS server is disabled by default and must be enabled for use with
this command.
Mode
RADIUS Server Configuration
Examples
To enable the local RADIUS server, use the following commands:
awplus#
awplus(config)#
awplus(config-radsrv)#
To disable the local RADIUS server, use the command:
awplus#
awplus(config)#
awplus(config-radsrv)#
Related
server auth-port
Commands
show radius local-server statistics
C613-50103-01 REV A
configure terminal
radius-server local
server enable
configure terminal
radius-server local
no server enable
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
1798
Advertisement
Table of Contents
