Duplex Mode; Table 8: X530-52Gpxm Switch Copper Port Specifications - Allied Telesis x530 Series Installation Manual

Port Speed

Duplex Mode

Maximum Distance
Power over Ethernet
Maximum Power Budget
PoE Mode
Connector
Duplex Mode
The copper ports can operate in either half- or full-duplex mode at 10Mbps
or 100Mbps and full-duplex only at higher speeds.
The duplex mode of a port operating at 10Mbps or 100Mbps, like port
speed, can be set manually using the management software or
automatically with Auto-Negotiation (IEEE 802.3u), the default setting.
The speed and duplex mode settings of a port can be set independently of
each other. For example in the case of a 10Mbps or 100Mbps port, it can
be configured such that its speed is set manually while its duplex mode is
established through Auto-Negotiation.
Table 8. x530-52GPXm Switch Copper Port Specifications
Specification
x530 Series Installation Guide for Virtual Chassis Stacking
Description
Ports 1 - 40: 10Mbps/100Mbps/1000Mbps.
Ports 41 - 48: 100Mbps or 1/2.5/5Gbps
Ports 1 - 40: Set the port speed manually
or with Auto-Negotiation at 10Mbps, and
100Mbps.
Ports 41 - 48: The port speed is set with
Auto-Negotiation only, at 1Gbps and
higher.
The default is Auto-Negotiation for all
ports.
Ports 1 - 40: Full- or half-duplex mode at
100Mbps. Full-duplex only at 1Gbps.
Supports Auto-Negotiation at 10Mbps and
100Mbps.
Ports 41- 48: Full-duplex only at all speeds.
100 meters (328 feet).
PoE (15.4W maximum per port) and PoE+
(30W maximum per port).
740W (370W per power supply).
Mode A.
8-pin RJ-45.
33