Log Buffered Exclude - Allied Telesis CentreCOM FS980M/9 Command Reference Manual

L C
OGGING OMMANDS

LOG BUFFERED EXCLUDE

log buffered exclude
Overview Use this command to exclude specified log messages from the buffered log. You
can exclude messages on the basis of:
•
•
•
•
•
Use the no variant of this command to stop excluding the specified messages.
log buffered exclude [level <level>] [program <program-name>]
Syntax
[facility <facility>] [msgtext <text-string>]
no log buffered exclude [level <level>] [program
<program-name>] [facility <facility>] [msgtext <text-string>]
Parameter Description
level
Exclude messages of the specified severity level.
<level>
The severity level to exclude. The level can be specified as one of the following numbers or
level names, where 0 is the highest severity and 7 is the lowest severity:
0|emergencies
1|alerts
2|critical
3|errors
4|warnings
5|notices
6|informational
7|debugging
program
Exclude messages from a specified program.
<program-
The name of a program. Either one of the following predefined program names (not
name>
case-sensitive), or another program name (case-sensitive) that you find in the log output.
rsvp
dot1x
lacp
stp
rstp
mstp
613-50157-01 Rev C
the priority/severity of the message
the program that generated the message
the logging facility used
a sub-string within the message, or
a combination of some or all of these.
System is unusable
Action must be taken immediately
Critical conditions
Error conditions
Warning conditions
Normal, but significant, conditions
Informational messages
Debug-level messages
Resource Reservation Protocol (RSVP)
IEEE 802.1X Port-Based Access Control
Link Aggregation Control Protocol (LACP)
Spanning Tree Protocol (STP)
Rapid Spanning Tree Protocol (RSTP)
Multiple Spanning Tree Protocol (MSTP)
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.7-0.x
256