Ipv6 Multicast Forward-Slow-Path-Packet - Allied Telesis AT-x510-28GTX Command Reference Manual

IP 6 C
V OMMANDS
6 -
IPV MULTICAST FORWARD SLOW

ipv6 multicast forward-slow-path-packet

Overview Use this command to enable multicast packets to be forwarded to the CPU.
Enabling this command will ensure that the layer L3 MTU is set correctly for each
IP multicast group and will apply the value of the smallest MTU among the
outgoing interfaces for the multicast group.
It will also ensure that a received packet that is larger than the MTU value will result
in the generation of an ICMP Too Big message.
Use the no variant of this command to disable the above functionality.
ipv6 multicast forward-slow-path-packet
Syntax
no ipv6 multicast forward-slow-path-packet
Default Disabled.
Mode Privileged Exec
Example To enable the ipv6 multicast forward-slow-path-packet function, use the following
commands:
awplus#
awplus(config)#
Related show ipv6 forwarding
Commands
C613-50102-01 REV C
- -
PATH PACKET
configure terminal
ip multicast forward-slow-path-packet
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
771