Table of Contents
Advertisement
D
N
S
(DNS) C
OMAIN
AME
ERVICE
IP DNS FORWARDING
ip dns forwarding
Overview
Use this command to enable DNS Relay, the forwarding of incoming DNS queries
for IP hostname-to-address translation.
Use the no variant of this command to disable the forwarding of incoming DNS
queries for IP hostname-to-address translation.
Syntax
ip dns forwarding
no ip dns forwarding
Default
The forwarding of incoming DNS query packets is disabled by default.
Mode
Global Configuration
Usage
DNS Relay requires that IP domain lookup is enabled. IP domain lookup is enabled
by default, but if it has been disabled, you can re-enable it by using the command
ip
See the
DNS Relay. See the
command.
Examples
To enable the forwarding of incoming DNS query packets, use the commands:
awplus#
awplus(config)#
To disable the forwarding of incoming DNS query packets, use the commands:
awplus#
awplus(config)#
Related
clear ip dns forwarding cache
Commands
debug ip dns forwarding
ip dns forwarding cache
ip dns forwarding dead-time
ip dns forwarding retry
ip dns forwarding source-interface
ip dns forwarding timeout
ip name-server
show ip dns forwarding
show ip dns forwarding cache
show ip dns forwarding server
C613-50103-01 REV A
OMMANDS
domain-lookup.
IP Feature Overview and Configuration Guide
ip dns forwarding dead-time
configure terminal
ip dns forwarding
configure terminal
no ip dns forwarding
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
for more information about
command used with this
711
Advertisement
Table of Contents
