Table of Contents
Advertisement
IP A
P
DDRESSING AND
ROTOCOL
SHOW IP SOCKETS
show ip sockets
Overview
Use this command to display information about the IP or TCP sockets that are
present on the device. It includes TCP, UDP listen sockets, displaying associated IP
address and port.
The information displayed for established TCP sessions includes the remote IP
address, port, and session state. Raw IP protocol listen socket information is also
displayed for protocols such as VRRP and ICMP6, which are configured to receive
IP packets with the associated protocol number.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
show ip sockets
Syntax
Mode
Privileged Exec
Usage
Use this command to verify that the socket being used is opening correctly. If there
is a local and remote endpoint, a connection is established with the ports
indicated.
Note that this command does not display sockets that are used internally for
exchanging data between the various processes that exist on the device and are
involved in its operation and management. It only displays sockets that are present
for the purposes of communicating with other external devices.
Example
To display IP sockets currently present on the device, use the command:
awplus#
Output
Figure 18-5: Example output from the show ip sockets command
C613-50103-01 REV A
C
OMMANDS
show ip sockets
Socket information
Not showing 40 local connections
Not showing 7 local listening ports
Typ Local Address
tcp 0.0.0.0:111
tcp 0.0.0.0:80
tcp 0.0.0.0:23
tcp 0.0.0.0:443
tcp 0.0.0.0:4743
tcp 0.0.0.0:873
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
Remote Address
0.0.0.0:*
0.0.0.0:*
0.0.0.0:*
0.0.0.0:*
0.0.0.0:*
0.0.0.0:*
"Getting Started
Guide.
State
LISTEN
LISTEN
LISTEN
LISTEN
LISTEN
LISTEN
695
Advertisement
Table of Contents
