SROS Command Line Interface Reference Guide
Usage Examples
The following example creates a QoS map with 4 traffic classes (based on IP packet precedence values)
and allocates bandwidth to each class:
ProCurve(config)#qos map MyMap 1
(
ProCurve
config-qos-map)#match precedence 5
(
ProCurve
config-qos-map)#bandwidth percent 25
ProCurve(config)#qos map MyMap 2
(
ProCurve
config-qos-map)#match precedence 3
(
ProCurve
config-qos-map)#bandwidth percent 10
ProCurve(config)#qos map MyMap 3
(
ProCurve
config-qos-map)#match precedence 2
(
ProCurve
config-qos-map)#bandwidth percent 10
ProCurve(config)#qos map MyMap 4
(
ProCurve
config-qos-map)#match precedence 1
(
ProCurve
config-qos-map)#bandwidth percent 15
5991-2114
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Quality of Service (QoS) Map Commands
1394