HP ProCurve 7102dl Reference Manual page 1415

SROS Command Line Interface Reference Guide
domain-name <domain>
Use the domain-name command to specify the domain name for the Dynamic Host Configuration
Protocol (DHCP) client. Use the no form of this command to remove the configured domain name.
Syntax Description
<name>
Default Values
By default, there are no specified domain names.
Usage Examples
The following example specifies a domain name of procurve.com:
ProCurve(config)#ip dhcp-server pool MyPool
ProCurve(config-dhcp)#domain-name procurve.com
5991-2114
Identifies the DHCP client (e.g., procurve.com) with an alphanumeric string (up to
32 characters in length).
© Copyright 2007 Hewlett-Packard Development Company, L.P.
DHCP Pool Command Set
1413