HP ProCurve 7102dl Reference Manual page 1411

SROS Command Line Interface Reference Guide
Where the FECN, BECN, C/R, DE, and high order EA bits are assumed to be 0, and the lower order
extended address (EA) bit is set to 1.
The following list provides a few example DLCIs and associated Q.922 addresses:
DLCI (decimal) / Q.922 address (hex)
16 / 0x0401
50 / 0x0C21
60 / 0x0CC1
70 / 0x1061
80 / 0x1401
Functional Notes
DHCP clients use client-identifiers in place of hardware addresses. To create the client identifier, begin
with the two-digit numerical code representing the media type and append the client's MAC address. For
example, a Microsoft client with an Ethernet (01) MAC address d2:17:04:91:11:50 uses a client identifier of
01:d2:17:04:91:11:50.
Usage Examples
The following example specifies the client identifier for a Microsoft client with an Ethernet MAC address of
d217.0491.1150:
ProCurve(config)#ip dhcp-server pool Microsoft_Clients
ProCurve(config-dhcp)#client-identifier 01:d2:17:04:91:11:50
5991-2114 © Copyright 2007 Hewlett-Packard Development Company, L.P.
DHCP Pool Command Set
1409