HP ProCurve 7102dl Reference Manual page 1382

SROS Command Line Interface Reference Guide Router (RIP) Configuration Command Set
auto-summary
Use the auto-summary command to have RIP version 2 summarize subnets to the classful boundaries.
Use the no form of this command to disable this summarization.
Syntax Description
No subcommands.
Default Values
By default, auto-summary is disabled.
Functional Notes
Use this command if you are subdividing a classful network into many subnets and these subnets are to be
advertised over a slow link (64K or less) to a router that can only reach the classful network via the router
you are configuring.
Usage Examples
The following example configures the router to not automatically summarize network numbers:
ProCurve(config)#router rip
ProCurve(config-rip)#no auto-summary
5991-2114 © Copyright 2007 Hewlett-Packard Development Company, L.P. 1380