Bfd Enable (Configuration); Bfd Enable (Interface) - Dell Force10 S4810P Reference Manual

Command History
Version 9.0.0.0
Version 8.2.1.0
Version 7.6.1.0
Version 7.5.1.0

bfd enable (Configuration)

Enable BFD on all interfaces.
C-Series, E-Series, Z-Series, S4810
Syntax bfd enable
Disable BFD using the no bfd enable command.
Defaults BFD is disabled by default.
Command Modes CONFIGURATION
Command History
Version 9.0.0.0
Version 8.3.10.0
Version 8.2.1.0
Version 7.6.1.0
Version 7.4.1.0

bfd enable (Interface)

Enable BFD on an interface.
C-Series, E-Series, Z-Series, S4810
Syntax bfd enable
Defaults BFD is enabled on all interfaces when you enable BFD from CONFIGURATION mode.
Command Modes INTERFACE
Command History
Version 9.0.0.0
Version 8.3.10.0
Version 8.2.1.0
Introduced on the Z9000.
Introduced on the E-Series ExaScale.
Introduced on the C-Series.
Introduced on the E-Series.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Introduced on the C-Series.
Introduced on the E-Series.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
337