Ip Router-Discovery Interface Advertisement-Lifetime - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

RDP Commands

ip router-discovery interface advertisement-lifetime

Configures the maximum amount of time, in seconds, that router IP addresses advertised from the speci-
fied interface are considered valid. This value is set in the lifetime field of the advertisement packets trans-
mitted on the specified RDP interface.
ip router-discovery interface name advertisement-lifetime seconds
Syntax Definitions
name
seconds
Defaults
parameter
seconds
Platforms Supported
OmniSwitch 6250
Usage Guidelines
•
The RDP interface advertisement lifetime value is not active unless RDP is enabled on the switch, and
the specified interface is also enabled.
•
Do not specify an advertisement lifetime value that is less than the value specified for the maximum
advertisement interval. To set the maximum advertisement interval value, use the
ip router-discovery interface max-advertisement-interval command.
Examples
-> ip router-discovery interface Marketing advertisement-lifetime 2000
-> ip router-discovery interface Accounting advertisement-lifetime 750
Release History
Release 6.6.1; command was introduced.
OmniSwitch 6250 CLI Reference Guide
The IP interface name that was defined at the time the IP interface was
configured.
The length of time, in seconds, that advertised IP addresses are consid-
ered valid by the receiving host. The range is the value set for the maxi-
mum advertisement interval to 9000.
default
3 * maximum advertisement interval
November 2009 page 31-11