Ip Rip Update-Interval - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

RIP Commands

ip rip update-interval

Configures the time interval during which RIP routing updates are sent out.
ip rip update-interval seconds
Syntax Definitions
seconds
Defaults
parameter
seconds
Platforms Supported
OmniSwitch 6250
Usage Guidelines
The update interval value must be less than or equal to one-third the invalid interval value.
Examples
-> ip rip update-interval 45
Release History
Release 6.6.1; command was introduced.
Related Commands
show ip rip
MIB Objects
alaProtocolRip
alaRipUpdateInterval
OmniSwitch 6250 CLI Reference Guide
The RIP routing update interval, in seconds. The valid range is 1–120.
default
30
Displays the RIP status and general configuration parameters (e.g.,
forced hold-down timer).
November 2009 page 33-19