Correct Shipping Errors; Position The Media Gateway; Position The Auxiliary Cabinet (Optional) - Avaya S8700 Installing Manual

Correct Shipping Errors

1 Red-tag all defective and over-shipped equipment and return to the nearest Material
Stocking Location (MSL).
To contact the Avaya Order Exception group in the United States, call 1-800-772-5409.
2
For international customers, contact your order service agent.
Direct all short-shipped reports to the nearest MSL.
3
4 Contact the appropriate location for specific instructions.

Position the Media Gateway

Each media gateway is normally positioned adjacent to the control hardware in the rack or
another media gateway.
NOTE:
Typically, the center stage switch is collocated with a port network (PN). It is not required
to be located in port network 1.
1 If the S8700 Multi-Connect configuration is supplied with cable ductwork, space the
media gateways on 32 in. (81.3 cm) centers +-1/8 in. (0.3 cm). They must be level and
must be square with respect to each other.
2 If the S8700 Multi-Connect configuration is supplied with cable slack managers, place
the media gateways far enough from the connection field to lay down the 32 in. (81.3
cm) slack managers and to provide a little extra room for the cables to access the cable
slack managers.
3 If earthquake protection is required,
on page 68.
4 If earthquake protection is not required, level the media gateways and adjust and lock the
media gateway stabilizing bolts to keep it from moving.
At the bottom of the media gateway, install the hole plugs provided in the holes
5
previously occupied by the 4 carriage bolts.

Position the Auxiliary Cabinet (Optional)

1 Position the auxiliary cabinet next to the control hardware in the rack (or a media
gateway). The location of equipment inside the auxiliary cabinet is specified in the
Customer Service Document (CSD).
If earthquake protection is required, refer to
2
Gateway'' on page
3 If earthquake protection is not required, level the auxiliary cabinet and adjust and lock its
stabilizing bolts to keep it from moving.
''Install Earthquake Protection for Media Gateway''
68.
October 2002
Installing an Avaya MCC1 Media Gateway
''Install Earthquake Protection for Media
67