Testing The Modem Connection (G350 Without S8300) - Avaya G350 Installing And Upgrading

Connecting and enabling a modem for remote access
14. In the PPP IP Address field, enter the RAS IP address of the modem obtained using the
ART tool. See
page 20.
15. Enter the PPP Subnet Mask.
16. Select the authentication method:
If you have an Avaya Service contract, check Enable ASG Authentication to enable
●
remote access to the device.
If you do not have an Avaya Service contract:
●
- Check Enable CHAP Authentication.
- In the CHAP Secret field, enter the CHAP secret key obtained using the ART tool.
- In the Confirm CHAP Secret field, re-enter the CHAP secret key.
17. Click Continue. The Connect Modem screen appears.
18. From the Connect Modem screen, click Finish to exit the Gateway Installation Wizard.
19. Click Finish.
20. Connect a USB modem to a working telephone line.
21. Connect one end of a USB cable to the modem.
22. Connect the other end of the USB cable to the USB port on the G350 front panel.

Testing the modem connection (G350 without S8300)

Dial into the modem to verify that you can authenticate to the modem.
1. Setup a dialup connection on a remote PC with the following settings:
- Automatically detect settings.
- No Username, Password, or Domain.
- Security > Show Terminal Window.
2. Dial in to the modem from the remote PC.
3. When prompted, provide the rasaccess login and password in the Terminal Window.
4. Close the Terminal Window to complete the connection.
5. Activate an SSH session.
6. Login valid authentication to the G350 CLI.
64 Installation and Upgrades for the Avaya G350 Media Gateway
Running the Automatic Registration Tool (ART) for the RAS IP address
See Running the Automatic Registration Tool (ART) for the RAS IP address
page 20.
on
on