Toyota T100 1996 Service Manual page 2046

AC−76
1996 TOYOTA T100 (RM449U)
AIR CONDITIONING − PRESSURE SWITCH
REMOVAL
1. REMOVE EVAPORATOR (See page AC−53)
2. REMOVE PRESSURE SWITCH FROM LIQUID TUBE
Disconnect the connector and remove the pressure switch.
Torque: 10 N·m (100 kgf·cm, 7 ft·lbf)
HINT:
Lock the switch mounted on the tube with an open end
S
wrench, being careful not to deform the tube and remove
the switch.
At the time of installation, please refer to the following
S
item.
I01456
Lubricate a new O−ring with the compressor oil and install
the switch.
AC0GG−02