1996 TOYOTA T100 (RM449U)
AIR CONDITIONING
−
CONDENSER
7.
DISCONNECT DISCHARGE HOSE FROM CONDENS-
ER
Remove the bolt and disconnect the liquid tubes from receiver.
Torque: 10 N·m (100 kgf·cm, 7 ft·lbf)
NOTICE:
Cap the open fittings immediately to keep moisture or dirt
out of the system.
HINT:
At the time of installation, please refer to the following item.
Lubricate a new O−ring with compressor oil and install the
tubes.
8.
REMOVE CONDENSER
Remove the 2 set bolts and pull out the condenser
HINT:
At the time of installation, please refer to the following item.
If condenser is replaced, add compressor oil to the condenser.
Add 40 cc (1.4 fl.oz.)
Compressor oil: ND−OIL 8 or equivalent
AC−51