Toyota T100 1996 Service Manual page 2030

AC−60
Expansion
Valve
1996 TOYOTA T100 (RM449U)
AIR CONDITIONING
Liquid Tube
Z04403
Z04402
− EXPANSION VALVE
REMOVAL
1. REMOVE EVAPORATOR (See page AC−53)
2. REMOVE EXPANSION VALVE
(a) Remove the packing and clamp, then disconnect the heat
sensing tube from suction tube of evaporator.
(b) Loosen the 2 nuts and remove the expansion valve from
evaporator and liquid tube.
Torque:
Expansion valve x Evaporator:
22 N·m (225 kgf·cm, 16 ft·lbf)
Expansion valve x Liquid tube
13 N·m (135 kgf·cm, 9 ft·lbf)
NOTICE:
Cap the open fittings immediately to keep moisture or dirt
out of the system.
HINT:
At the time of installation, please refer to the following item.
Lubricate 2 new O−rings with compressor oil and install the
valve.
AC0G1−02