Heater Radiator Pipe
Water Hose
Hose Clip
Second Ridge
1996 TOYOTA T100 (RM449U)
AIR CONDITIONING
REMOVAL
1.
DRAIN ENGINE COOLANT FROM RADIATOR
HINT:
It is not necessary to drain out all coolant.
2.
DISCONNECT WATER VALVE CONTROL CABLE
FROM WATER VALVE
HINT:
At the time of installation, please refer to the following item.
After installation, adjust the control cable (See page AC−91).
3.
DISCONNECT WATER HOSES
(a)
Using pliers grip the claws of hose clip and slide the clip
along the hose.
(b)
Disconnect the water hose.
I04699
HINT:
At the time of installation, please refer to the following item.
Upper
Push the water hose onto the heater radiator pipe as far
S
as second ridge on the pipe.
Push the water hose onto the pipe of water valve pipe as
S
far as water valve.
4.
REMOVE WATER VALVE
Remove the bolt and water valve.
Lower
I04700
−
WATER VALVE
AC−63
AC0G3−01