Table of Contents
Advertisement
Front Door:
1 1 . A d j u s t c l e a r a n c e
" H " a s f o l l o w s .
- 1
"
{see page 20-42}
Loosen the bolts and locknut securing the front
sash, and move the front sash all the way
f o r w a r d .
NOTE: Hold the adjusting bolt with a hex
w r e n c h w h e n l o o s e n i n g t h e l o c k n u t .
- 2 L o o s e n t h e n u t s e c u r i n g t h e s t o p p e r p l a t e s .
-3 Loosen the bolts securing the glass, and move
the glass up or down to align it with the retain
STOPPER €-r7
-\---
PLATE
lErt-:<'7--
LOCKNUT
4 Loosen the nuts and locknuts securing the glass
guide, and regulator. Adjust the glass lore and
a f t b y m o v i n g t h e g l a s s g u i d e a n d r e g u l a t o r .
NOTE: Hold rhe adjusting bolts with a hex
wrench when loosening the locknuts.
- 5 R e p e a t s t e p s - 3 t h r u - 4 u n t i l c l e a r a n c e " H "
is within the specified limits, then tasten the
glass guide and regulator.
Press the stopper plates against the glass stop-
pers, then fasten the stopper plates.
NOTE: Check that the stopper plates contact
the glass stoppers evenly.
- 6 Align the front sash with the glass, then lasten
t h e f r o n t s a s h .
(cont'd)
20-43
Advertisement
Table of Contents
Troubleshooting
