Table of Contents
Advertisement
Precautions/Procedures
Spring-loaded Lock Conneetor
Spring-loaded Lock Gonnector
with Built-in Short Contact
The driver's and front passenger's airbag have a spring-
l o a d e d l o c k c o n n e c t o r w i t h a b u i l t - i n s h o r t c o n t a c t .
When this connector is disconnected, the power termi-
nal and the ground terminal in the airbag connector are
automatically shorted.
Connestor halves dbconnoctgd:
GROU D IERMINAL
SHONT OONTACI
CABTI REEL @I{I{ECTOF
Conncctor hrlvag connected:
Some SRS system connectors have a spring-loaded lock.
Disconn€cting
To release the lock, pull the spring-loaded sleeve toward
the stop while holding the opposite half ot the connector.
Then puilthe connector halves apart.
N O T E : B e s u r e t o p u l l
connector half.
o n t h e s l e e v e a n d n o t o n t h e
SPRII{G.LOADED
sL"EEvE
Do not pullon this
halt of the connector-
Conneqting
1. Hold the pawl-side connector half, and press on the
back of the sleeve-side connector half in the direction
shown. As the two connector halves are pressed
together, the sleeve is pushed back by the pawl.
NOTE: Do not touch the sleeve,
When the connector halves are completely connected,
the pawl is released, and the spring-loaded sleeve
locks the connector.
SPRIM;-LOADED
SLECVE
acr
GAOUND TERi'INAL
@NTACT
CABII REEL
ooNtrEcron
23-284
CONYACT
Advertisement
Table of Contents
Troubleshooting
