Table of Contents
Advertisement
t
Driveshafts
Inspection
Drivcshatt Boot
Check the boots on the driveshaft tor cracks. damage,
leaking grease or loose boot bands.
l f a n y d a m a g e i s f o u n d , r e p l a c e t h e b o o t a n d b o o t
oanos.
Looso SplineE
Turn the driveshaft by hand and moke sure the splines
and joint are not excessively loose.
lf damage is found, replace the joints if necessary.
Twisled or Crscked
Make sure the driveshaft is not tlvisted or cracked.
Replace it if necessary.
BOOT BANDS
1 .
Loosen the wheel nuts slightly,
Raise the front of ca. and support it with safety
stands in the prope. locations {see section 1).
Remove the wheel nuts and front wheels.
5 .
Drain the transmission oil or fluid (see section 13 or
1 4 t .
NOTE: lt is not necessary to drain the transmission
oil or fluid when the left driveshaft is removed.
R a i s e t h e l o c k i n g t a b o n t h e s p i n d l e n u t , t h e n
remove the nut.
6.
Remove the self-locking nut and flange bolts.
FLANGE BOLT
'10 x 1.25
SELF.LOCKING NUT
12 x 1.25 mm
Replace.
(cont'd)
Replace.
7.
Remove the damoer fork.
Removal
6-3
Advertisement
Table of Contents
Troubleshooting
