Acura Integra 1998 Service Manual page 381

9 . Measure the clearance between the select arm
t h e c h a n g e p i e c e .
Standard:
0.05 - 0.35 mm {0.002 - 0.014 in)
Service Limit: 0.5 mm {0.02 inl
Removal
Remove the shift piece shaft, then remove the shift
piece and the interlock.
2.
Remove the change holder assembly.
a n d
1 0 .
lf the clearance is more than the service limit, mea
s u r e t h e w i d t h o f t h e c h a n g e p i e c e -
Standard: 12.05 - 12.15 mm {0.4744 - 0.4783 inl
CHANGE PIECE
l f t h e w i d t h i s n o t w i t h i n t h e s t a n d a r d , r e p l a c e
t h e c h a n g e p i e c e w i t h a n e w o n e .
l f t h e w i d t h i s w i t h i n t h e s t a n d a r d , r e p l a c e t h e
select arm with a new one.
SELECT ARM
SHIFT PIECE SHAFT
INTERLOCK