NOTE: Before adjusting the trunk lid. loosen each bolt slightly.
1. Adjust the trunk lid hinges right and left, as well as fore and att, by using the elongated holes.
2. Turn the trunk lid edge cushions, as necessary. to make the trunk lid fit flush with the body at the rear and side edges.
3. Adjust the lit between the trunk lid and the trunk lid opening by moving the striker.
TNUNK LID EDGE
CUSHION
TRUNK LIO
HINGE
NOTE: Move the striker right or left until it's centered
in the trunk lid latch as shown.
6 r 1 . 0 m m
9 . 8 N m ( 1 . O k g f . m ,
7 .2 tbt.ltl
6 x
'1.0 mm
STRIKER
STFIKER
4.
After adjustment, tighten each bolt securely.
Adjustment
20-15 3