Acura Integra 1998 Service Manual page 1168

Rectifier Removal
MITSUBISHI:
1. Remove the four through bolts.
3 . Separate the rear housing from the drive-end hous-
ing by inserting a flat tip screwdriver into the open-
ings and prying them a part. Be careful not to dam-
age the stator with the tip of the screwdriver.
Separate the rear housing and drive-end
with the stator anached to the rear housinq.
n o u s r n g
2 .
Heat the rear bearing seat with a 1,000 W hair drier
for about five minutes (120 - 140'F, 50 - 60'C).
HAIN DRIER
NEAR AEARING
SEAT
STATOR
(cont'd)
FEAR HOUSING
DRIVE.END HOUSIT{G
DRIVE.END HOUSING
REAR HOUSING
)
{
{
)
23-111
t