Table of Contents
Advertisement
Starting System
Starter Replacement
NOTE: The original radio has a coded theft protection
citcuit. Be sure to get the customer's code number before
- disconnecting the battery.
-
removing the No. 47 {7.5 A) fuse from the under-hood
fuse/rslav box.
- removing the radio.
After service, reconnect power to the radio and turn it
on. When the word "CODE" is displayed. enter the cus-
tomer's 5-digit code to restore radio operation.
Disconnect the negative cable trom the battery.
Remove the intake air duct.
AIR CLEANER
HOUSING
R€move the engine wire harness and starter cables
from their brackets.
1 .
3 .
INTAKE AIR DUCT
ENGINE WIRE HARNESS
CABLES
23-80
5 .
Disconnect the starter cable from the B terminal on
rhe solenoid, then disconnect the BLK/WHT wire
f r o m t h e S t e r m i n a l .
Remove the two bolts holding the starter, then re-
move the starter.
UPPER MOUNTING BOLT
44 N.m (4.5 kgf.m, 33 lbt.fr)
STARTER CABLE
TERMINAL
BLK/WHT WIRE
6.
Install in the reverse order of removal.
Advertisement
Table of Contents
Troubleshooting
