Acura Integra 1998 Service Manual page 1225

Replacement
'1. Remove
the steering column covers.
Disconnect the 4P and 7P connectors from the com-
bination light switch, then remove the two screws
and lift out the switch.
,P CONNECTOR
Lighting System
Combination Light Switch Daytime Running Lights Resistor
Test (Canada)
CAUTION: The daytime running lights resistor becomes
vely hot when the daytime running lights arc on; do not
touch it or the attaching hardware immediately altel the
lights have been tulned otf.
1. Disconnect the 3P connector from the resistor.
DAYTIME RUNNING
LIGHTS RESISTOR
2 . Measure the resistance between the resistor termi-
nals (A and B) and the power terminal C.
Resistance: 1.4 O 1 O.O7 o
Replace the resistor with a new one il any of the
resistances are beyond specification.
;w;
V
View from terminal side
23-168