Table of Contents
Advertisement
Mainshaft Assembly
Clearance Inspection (cont'dl
Measure the clearance between sth qear and
50acer collar.
Standard:
0.06 - 0.21 mm (0.002 - 0.008 in)
S€rvica limit: 0.3 mm {0.012 inl
t h e
8.
lf distance (9 is not within the standard, replace the
spacer collar with a new one.
lf distance @ is within the standard, measure the
thickness of sth gear.
Standard:
31.42 -31.17 mm (1.237 - 1.239 inl
Service Limit:31.3 mm {1.232 inl
7 . lf the clearance is more than the service limit, mea-
s u r e d i s t a n c e @ o n t h e s p a c e r c o l l a r .
Stsndard: 26.03 - 26.08 mm (1.025 - 1.027 in)
lf the thickness of sth gear is less than the ser-
vice limit, replace 5th gear with a new one.
lf the thickness of sth gear is within the service
l i m i t , r e p l a c e t h e 5 t h s v n c h r o h u b w i t h a n e w
o n e .
SPACER COI-LAR
sTH GEAR
5TH GEAR
Advertisement
Table of Contents
Troubleshooting
