Table of Contents
Advertisement
J
)
1 . Remove the two ashtray mounting screws. Then pull
out the ashtray from the front console panel. and
disconnect the 4P connector.
2 . Disconnect the thermofuse case from the
e n d .
Remove the thermal protector, and pull
cigarette lighter socket.
socket
out the
CIGARETTE LIGHTER
LTGHT t1.4 Wl
ASHTRAY LIGHT
t 1 . 4 W l
EULB CASE
FRONT CONSOLE
PANEL
THERMOFUSE
CASE
RING NUT
THERMAL PROTECTOR
scREws
ILLUMINATION
RING
CrcANETTE LIGHTER
socxET
When installing the cigarette lighter, align each lug
on the face panel, illumination ring, and cigarette
lighter socket with the groove of the hole. then po-
sition the bulb housing on the thermal protector be-
tween the stops in the console panel.
Make sure that the ground wire, bulb socket, and
thermofuse housing are seated to the cigarette light-
er assembly.
5 .
ASHTRAY
l \ -
23-213
Advertisement
Table of Contents
Troubleshooting
