Table of Contents
Advertisement
Disconnecting the Airbag Connector(s)
!@
To prevent accidental airbag dsploymcnt, turn ths ignition switch OFF, disconnect the negrtive battory
able, and wait three minut€s before disconnesting any SRS Glnnoqto.s.
.
Before disconnecting the SRS main harness {A)from the SRS unit, disconnect both airbags (C, D).
.
Before disconnecting the cable reel 2P con nector ( B). disconnect the driver's airbag 2P connector (C).
)
1. Disconnect the negative baftery cable. and wait at
least three minutes.
2.
Disconnect the airbag connector(s).
Driver's Side:
.
Remove the access panel from the steering wheel,
then disconnect the driver's airbag 2P connector and
cable reel 2P connector.
CABLE REEL
2?
CONNECTOR
Front Ps$sngar'3 Sid.:
. Remove the glove box. then disconnect the front pas-
senger's airbag 2P connector and SRS main harness
2P connector,
\,./AccEssPANEL
23-2A5
Advertisement
Table of Contents
Troubleshooting
