Table of Contents
Advertisement
TCM Reset Procodure
1. Turn the ignition switch OFF.
2.
Remove the No. 47 BACK UP fuse {7.8 A) from the under-hood fuse/relay box for lO seconds to reset the TCM.
NOTE:
. Disconnecting the No, 47 BACK UP fuse also cancels the radio anti-theft code, preset stations and clock setting, Get the
customer's code number, and make note of the rsdio presets before removing the fuse so you can reset them.
o The TCM memory cannot be cleared by using the OBD ll Scan Tool or Honda pGM Tester; be sure to remove the BACK
UP fuse to reset the TCM.
BACK UP (7.5 A) FUSE
J
UNDER.HOOD
FUSE/RELAY BOX
. Final Procodurs
NOTE: This procedure must be done after any trou bleshooting.
1. Turn the ignition switch OFF.
2.
Reset the TCM.
3.
Disconnect the OBD ll Scan Tool or Honda PGM Tester from the Data Link Connector, or remove the sDecial tool from
the Service Check Connector.
4. Turn the ignition switch ON (ll), and set the radio presets and clock setting.
1 4- 5 3
Advertisement
Table of Contents
Troubleshooting
