Table of Contents
Advertisement
Differential (81 8BJ engine)
Side Clearance Adjustment
1. lnstall the dilferential assembly, making sure at bot-
toms in the clutch housing, using the special tool as
shown.
DRIVER, 40 mm I D.
o7746-0030100
HOUSING
2 . I n s t a l l t h e 8 0 m m s h i m .
NOTE: Insrall the 80 mm shim that was removed.
mm SHIM
1 5 - 6
3 . Install the transmission housing (see section 13).
NOTE: Do not apply liquid gasket to the mating sur-
face of the clutch housing.
Tighten the transmission housing attaching bolts
{ s e e s e c t i o n l 3 } .
8 x 1 . 2 5 m m
27 N.m {2.8 kgf.m. 20 lbf'ft}
Use the special tool to bottom the differential assem-
bly in the clutch housing.
Measure clearance between the 80 mm shim and
bearing outer race in the transmission housing.
5 .
6 .
Advertisement
Table of Contents
Troubleshooting
