Adjustment
NOTE: Before adjusting the throttle controlcable, make
sure:
a Throttle cable lree play is correct (see section 11).
a ldle speed is correct (see section 11).
a To warm up the engine to normal operating tempera-
ture {the cooling fan comes on)
1 . Verify that the throttle control cable is clamped cor
rectly in three positions.
THROTTLE
ATF COOLER
PIPE
LOWER
HOSE
Clamp at the end of
blue tape on the cable.
Verily that the throttle linkage is in the fully-closed
posttron.
Loosen the locknut of the throttle control cable at
the throttle linkage.
CONTROL CABLE
LOCKNUTS
14-181
Push in this directron.
Remove the free play of the throttle control cable
with the locknut, while pushing the throttle control
drum to the tull-closed potision as shown.
5. Tighten the locknuts.
6 . After tightening the locknuts, inspect the synchroni-
zation and throttle control drum movement.