Table of Contents
Advertisement
Brake System Indicator
Parking Brake Switch Test
1 .
Remove the Iloor console, and disconnect the con-
nector from the switch.
Check for continuity between the positive terminal
and body ground in each lever position according to
t h e t a b l e .
2 .
POSITIVE
BODY GROUND
TERMINAL
Canada:
lf the parking brake switch is OK, but the brake sys-
tem indicator does not function, perform the input
test for the daytime running lights control unit {see
page 23-164).
\
Terminal
l"*rr*ril---lt
POSITIVE
BODY
UP
o
o
DOWN
'il
--r
'1
T -
+ T
L.J
Brake Fluid Level Switch Test
Remove the reservoir cap.
Check that the float moves up and down freely; if
it does not, replace the reservoir cap assembly.
Check for continuity between the terminals in each
lloat position according to the table.
POStnVE
TERMINAL
RESERVOIR CAP
DOWN POSITION
4l
NEGATIVE
TERMINAL
MAGNET
POSITTVE
TERMINAL
*----raoo,
Switch contacrs closed
when float drops.
UP POSITION
TIVE
TERMINAL
Switch contacts open at
proper fluid level.
4.
lf necessary, replace the reservoir cap assemblv.
\
| ermrnal
Float position
\
POSITIVE
NEGATIVE
UP
DOWN
o
--o
I
Advertisement
Table of Contents
Troubleshooting
