Acura Integra 1998 Service Manual page 427

Description
Power Flow (cont'dl
E] Position Acceleration
In f
position, hydraulic pressure is applied to the 1st clutch and the
'lst-hold
clutch.
The power flow when accelerating is as follows:
1 . Hydraulic pressure is applied to the 1st clutch on the mainshaft and power is transmitted via the 1st clutch to the
mainshalt
'1st gear.
2. Hydraulic pressure is also applied to the 1st-hold clutch on the sub-shaft. Power transmitted to the mainshaft 1st
gear is conveyed via the countershaft 1st gear to the one-way clutch, and via the sub-shaft 1st gear to the 1st-hold
clutch. The one-way clutch is used to drive the countershaft, and the lst-hold clutch drives the countershatt via
the 4th gears.
3. Power is transmitted to the final drive gear, which drives the final driven gear.
SUB-SHAFT 4TH GEAR
1ST-HOLD CLUTCH
SUB-SHAFT
MAINSHAFT 1ST GEAR
1ST CLUTCH
MAINSHAFT
COUNTERSHAFT
ONE-WAY CLUTCH
PARKING GEAR
1ST GEAR
SUB-SHAFT 1ST GEAR
FINAL DRIVEN GEAR
14-10
'l
t