Table of Contents
Advertisement
9. Apply Molykote M77 gresse to both sides of the,
pad shims and to the back of the pads. Wipe excess
grease off the shim,
Apply N4olykote M77
to both sides ot shims. WEAR |ND|CATOR
OUTER PAD
INN
\
ER
,
OUTER PAD SHIM
Appty Motykote M77
to both sides of shim,
10. Install the brake pads and pad shims correctly.
a When reusing the pads, always reinstall the brake
pads in their original positions to prevent loss of
braking etficiency.
a Contaminated btake discs ot pads reduce stop,
ping ability. Keep grease oft the discs and pads.
NOTE: lnstall the pad wilh the wear indicator on the
i n s i d e .
1 1 .
1 4 .
Push in the piston so that the caliper will fit over the
pads. Make sure that the piston boot is in position
to prevent damaging it when pivoting the caliper
d o w n .
Pivot the caliper down into position, then install the
caliper bolt and tighten it. Be careful not damage
the pin boot when pivoting the caliper down.
CAUPER AOLT
Typ. R Mod.l:
4!, N.m (5.0 kgl.m,36lbtft)
All .xc.pt Typ. R Modcl:
32 N.m 13.3 kgf.m,24 lbf.ftl
1 3 .
Depress the brake pedal several times to make sure
the brakes work, then road-test.
NOTE: Engagement of the brake may require a
greater pedal stroke immediately after the brake pads
have been replaced as a set. Several aDplications of
the brake pedal will restore the normal pedal stroke.
After installation, check for leaks at hose and line
joints or connections, and retighten it necessary.
1 9 - 9
Advertisement
Table of Contents
Troubleshooting
