Acura Integra 1998 Service Manual page 431

Description
Power Flow (cont'd)
l D + l o r D g l P o s i t i o n , 2 n d g e a r
1. Hydraulic pressure is applied to the 2nd clutch, which rotates together with the mainshaft, and the mainshaft 2nd
gear rolares.
2. Power is transmitted to the countershaft 2nd gear, which drives the countershaft
3. Power is transmitted to the final drive gear, which drives the final driven gear.
N O T E :
In @ or f_fl position. 2nd speed, hydraulic pressure is also applied to the 1st clutch, but since the rotation speed
ot 2nd gear exceeds that of 1st gear, power from lst gear is cut off at the one-way clutch
TOROUE CONVERTER
MAINSHAFT
COUNTERSHAFT
FINAL DRIVE GEAR
L
2ND CLUTCH
14-14
FINAL DRIVEN GEAR