Table of Contents
Advertisement
9 .
1 .
8 .
1 1 .
1 0 .
Connect the ignition switch wire connectors to the
under-dash fuse/relay box.
Install the combination switch and connect the con,
nectors. Be sure the wires are not caught or pinched
by any parts when installing the combination switch.
Carefully install the wire harness with the harness
bands and clamps.
I n s t a l l t h e s p r i n g a n d t u r n s i g n a l c a n c e l i n g s l e e v e
onto the combination switch.
Install the cable reel, and connect the cruise control
switch connector.
C o n n e c t t h e c a b l e r e e l c o n n e c t o r a n d S R S m a i n
wire harness connector (see page '17-27).
NOTE: Align the slot in the cable reel with the pro-
jection on the canceling sleeve.
CABLE REEL
CONNECTOR HOLDER
COMBINATION SWITCH
SLEEVE
SRS WIRE
17-33
12. Installthe column covers.
UPPER COLUMN COVER
LOWER COLUMN
COVER
scREws
1 3 .
1 4 .
Install the driver's knee bolster.
lnstall the lower cover.
Install the steering wheel (see page 17 26).
LOWEF COVER
Advertisement
Table of Contents
Troubleshooting
