Clutch
Reassembly {cont'd)
7. Install the snap ring.
Remove the special tools.
lnstall the disc spring.
NOTE: lnstallthe disc spring in the direction shown.
2ND CLUTCH
j
I
SNAP RING
DISC SPRING
OISC SPRING
1ST, 3RD, 4TH and
,IST-HOLD
CLUTCH
14-152
\
10. Soak the clutch discs thoroughly in ATF for a mini-
mum of 30 minutes.
11. Starting with a clutch plate, alternatelY install the
clutch Dlates and discs. Install the clutch end plate
with flat side toward the disc.
NOTE: Before installinq the plates and discs, make
sure the inside of the clutch drum is ttee of dirt or
other loreign matter.
CLUTCH END PLATE
Install in this direction.
12. Install the snap ring.
SCREWDRIVER
SNAP FING