f
N O T E :
a Clean all parts thoroughly in solvent or carburetor
cleaner and dry with compressed air.
a Blow out all passages.
a When removing the transmission housing, replace the
tollowing:
. Transmission housing gasket
. Lock washer
1. Remove the transmission mount bracket.
2 .
Remove the transmission housing mounting bolts
a n d h a n g e r .
Align the spring pin of the control shatr wirh the
transmission housing groove by turning the control
shatt.
Install the special tool on the transmission housing,
then remove the housing as shown.
TRANSMISSTON
HOUSING
HOUSING PULLER
5 .
6 .
Remove the countershaft reverse gear with the col-
lar and needle bearing.
Remove the lock bolt securing the shilt fork. then
remove the fork with the reverse selector from the
countershatt.
Remove the countershaft and mainshaft sub-
assembly together.
8.
Remove the differential assemblv.
7 .
14-117