Table of Contents
Advertisement
15. Disconnect the two lines from the valve bodv unit
on the steering gearbox.
CAUTION: After disconnscting the hose and line,
plug or seal the hose and lino whh I pi6ce ot tape
o. oquivalent to prevont foreign matarials from
6rioring the vslve body unit,
NOTE:
. Place the line disconnected in the previous steD
at the rear side of the gearbox so that they do
not hinder in the gearbox removal.
. Do not loosen the cylinder lines A and B between
the valve body unit 8nd cvlinoer.
ADJUSTABLE HOSE CLAMP
Remove the steering gearbox mounting bolts.
1 6 .
\
RETURN HOSE
GEARBOX MOUNTING BOTTS
17-43
't7.
1 9 .
Pull the steering gearbox all the way down to clear
the pinion shaft from the bulkhead, and remove the
pinion shaft grommet.
Move the steering gearbox to the right so th€ left
rack end clears the rear beam.
Mov€ the steering gearbox to the loft, and tilt the
left side down to remove it from the vehicle.
PINION SHAFT GBOMMET
STEERING GEARBOX
Advertisement
Table of Contents
Troubleshooting
